AN-50e
user manual
70-00033-01-03
Proprietary Redline Communications © 2005
September
2005
Page 86 of 100
6.4 CLI
Interface
6.4.1 Console (RS-232) Port
All operator communications with the terminal may be made using a direct
connection to the serial Console Port on the back of the terminal. This section
describes the procedures for configuring and operating the terminal via the
Console Port using the command line interface (CLI).
Connect a PC/Terminal to the terminal's serial port DB-9 connector using a cross-
connect or null modem cable (DB-9 female-female). Set the PC/Terminal to
emulate a VT-52 or VT-100 terminal, using the following port settings: Bits Per
Second: 9600; Data Bits: 8; Parity: None; Stop Bits: 1; Flow Control: Hardware
The following table lists the terminal 9 PIN D-SUB male connector pinout.
Table 35
:
Spec. - Console (RS-232) Port Pinout
Pin
Name
RS232
V.24
Description
2 RXD BB
104 Receive
Data
3 TXD BA
103 Transmit
Data
5 GND AB
102 System
Ground
V.24 column is ITU-TSS V.24 circuit name.
RS232 column is RS232 circuit name.
