AN-50 System User Manual
Redline Communications
…..solving the first mile challenge
.
Figure 17: Link Configuration
Wireless Link:
Link Name:
A user specified alphanumeric identifier for the link. The name remains with
the system, even during power-off states, until the operator re-types a new name using
this menu field. This field should be limited to 8 characters
Link ID:
Automatically generates a numeric ID for the specified link name. For a new
link, the default ID is always zero. After saving the parameter on the Link Configuration
screen, the AN-50 system will automatically choose a link ID other than zero. Using the
ID Browser, one can search for the specific Link ID associated with the link name.
Peer MAC:
Enter the MAC address of the subscriber station to register the remote unit.
If the MAC address is not properly entered, the wireless link will not be established and
no Ethernet packets can be transferred.
Max. DL Burst Rate:
Maximum downlink (DL) burst rate. Note: Defines the maximum
downstream burst rate
Max UL Burst Rate:
Maximum uplink (UL) burst rate. Defines the maximum upstream
burst rate.
Port:
Max Host:
Defines the maximum number of hosts (i.e. PCs, …etc) to be learned from
the corresponding Subscriber Station.
Connection:
DL QoS Level:
Enter the downlink QoS level. See “PMP Configuration Tool” appendix
section below for more information.
Page 34 of 76
Summary of Contents for AN-50
