Redline Communications AN-50, User Manual

Page: 26 / 76

AN-50 System User Manual
Redline Communications …..solving the first mile challenge .
NOTICE
1 - The AN-50 System is used as a fixed wireless Ethernet bridge that requires
professional installation with specified antennas and output power levels certified under
the FCC Grant for AN-50 System for Point-to -Point or Point-to-Multipoint mode of
operations.
2 - FCC RF Exposure Requirements - The antenna(s) used for this transmitter must be
fixed-mounted on outdoor permanent structures with a separation distance of at least 3.1
meters (9.3 feet) from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
3 - The AN-50 System is certified by the FCC and Industry Canada with 5.8 GHz
Directional and Parabolic Antennas, listed bellow:
Redline Part Number Antenna Gain, dBi Antenna Type Application
48-00017 14.0 Directional, sector PMP
48-00025 14.0 Omni Directional, flat panel PMP
48-00014 15.0 Omni Directional, flat panel PMP
48-00041 21.0 Directional, flat panel PMP & PTP
48-00020 23.0 Directional, flat panel PMP & PTP
48-00006 28.0 Directional, flat panel PMP & PTP
48-00028 17.0 Directional, sector PMP
48-00029 16.0 Directional, sector PMP
48-00030 22.5
Directional, parabolic PMP & PTP
48-00031 29.0 Directional, parabolic PMP & PTP
48-00032 31.2 Directional, parabolic PMP & PTP
48-00033 34.8 Directional, parabolic PMP & PTP
48-00040 29.0 Directional, parabolic PMP & PTP
48-00039 31.0 Directional, parabolic PMP & PTP
4 - For fixed, point-to-point mode of operations, the transmitting antennas must be
directional as specified in this Users Manual; the use of omni-directional antenna is
prohibited for point-to-point operation.
Page 26 of 76