Redline Communications AN-50, User Manual

Page: 29 / 76

AN-50 System User Manual
Redline Communications …..solving the first mile challenge .
8.1. System Configuration
The System Configuration page provides a simple-to-use Graphical User Interface (GUI)
for the operator to input a complete set of system parameters for both the Ethernet and
Wireless components of the AN-50 terminal. Note all parameters under System
Configuration are global and apply to every subscriber station. To store the parameters
into memory, click the Save Configuration button at the bottom of this page. This
operation is recorded in the System Logs.
Note: It is important to ensure that all fields on the System Configuration page are filled out
properly for local and remote terminals. Errors in these fields will result in the inability to establish
a communication link. Please read carefully to ensure a quick, trouble-free deployment.
Figure 15: System Configuration
The system configuration includes the following fields:
System Configuration:
System Name: An alphanumeric identifier for the local terminal, which can consist of
any combination of letters and numbers up to 20 characters in length. The default name
for the system from the factory is set to WEB01. The name remains with the system,
even during power off states, until the operator re-types a new name using this menu
field.
System Details: Specifies the location of the unit, telephone number and/or contact
information of the network administrator. Can be up to 20 characters in length.
Page 29 of 76