6
www.redbacklasers.com.au
CXR880
TM
OPERATING INSTRUCTIONS
Battery & Charging Instructions
To charge these batteries, simply insert the charger plug into the charging
socket. The LED is illuminated red during the charging process and will turn
green once the batteries are fully charged.
When the power LED on the keypad flashes, the battery needs recharging.
It is recommended to run the battery until the power LED is flashing this
helps to extend the life of the battery. Note the charger will only charge the
supplied rechargeable battery packs.
Handy Hints
•
Prior to initial use, charge the rechargeable batteries for at least 8
hours. (batteries are not charged when shipped)
•
Running rechargeable batteries completely flat will increase battery life.
•
The CXR880™ can operate off mains by plugging the charger (for
indoor use only) into the unit.
•
Remember the CXR880™ can operate using standard batteries when
rechargeable ones are out of charge.
The CXR880 has two battery options either 4 x standard “C” size Alkaline or
the Ni-Mh rechargeable packs.
For standard 4 x “C” alkaline operation simply insert batteries into the
battery compartment in the direction indicated and replace the battery
compartment cover. Note a good quality Alkaline battery is recommended
anything less will provide only limited running time.
To use the rechargeable batteries insert green
battery packs into the same battery compartment
and connect the battery wire plugs onto the sockets
(they will only go on one way). Replace the battery
cover and tighten the screw.
Summary of Contents for CXR880
Page 1: ......
