12
Laser Receiver LRMULTI
(refer to diagram page 5)
The Multi Function Receiver detects both pulsed laser lines and rotating
lasers although not at the same time. The LRMULTI can be switched between
rotating and line modes with the Power button on the receiver.
•
A short press of the Power button on the receiver will turn on and
off the receiver.
•
A long (1 second press) of the same button once turned on will toggle
between rotating and line laser modes.
A GREEN illuminated power
LED indicates Rotation mode and a RED LED is Line mode.
Note: lines will only be picked up if the laser lines have also
been put into pulse mode see page 9.
•
Pressing the Speaker button toggles speaker on and off.
•
Pressing the Coarse/Fine Mode button has a different affect
depending if the receiver is set to Line or Rotation.
•
In Rotation Mode this button toggles between coarse and fine
mode, in fine mode indicated by the accuracy of level is at
its highest with only small movements up or down by the receiver
taking it off level. In coarse mode there is more movement
up and down allowed before showing off level this is more suitable
for general site levelling.
•
In Line Mode this same button toggles between Short and Long
Range reception. Short range indicated by gives accurate
reception of pulsed line laser up to approx 10m and Long Range
indicated by will receive between 10m to 60m from laser.
The LRMULTI has 3 LED light displays which indicate laser is above, below and
on level and a large LCD display which has a progressive display indicating
when the laser gets closer to the level mark. If the receiver is left turned
on without a laser being received it will auto power down after 10 minutes.
www.redbacklasers.com.au
Indicates laser beam is below
line - slide receiver down.
Indicates laser beam is above
line - slide receiver up.
Indicates laser beam is on the
line.
LED lights
duplicate LCD
results.
LRMULTI
TM
RECEIVER INSTRUCTIONS
Summary of Contents for CXR880
Page 1: ......
