RedBack Laser CXR880, Instruction Manual

Page: 14 / 16

14
CXR880
TM
TECHNICAL SPECIFICATIONS
Laser Wavelength 635nm <1mW
Laser Class II
Range with Receiver 500m Diam Rotating
60m Radius Line (Pulse)
Horizontal Accuracy ±2mm/20m
Vertical Line Accuracy ±2mm/10m
Plumb Down point Accuracy ±4mm/10m
Vertical Line Angle Accuracy ±3mm/10m
Rotation Speeds 200rpm, 500rpm
Self Levelling Range ±5
o
Temperature Range -10
o
C - 45
o
C
Scan Angles 60
o
, 30
o
, 5
o
, 0
o
IP Dust Water Resistance IP55
Power 4 x “C” Alkaline or Ni-Mh pack
Low Power Power LED Flash
Size 142x170x194mm
Weight 2.5Kg
Technical Specifications
Calibration & Self Check
All Redback Lasers have been checked for calibration and certified by one
of our technicians here in Australia prior to despatch and should under
normal conditions not go out of calibration. A calibration certified sticker
with the date and name of technician is located on the laser itself. It is
worth checking calibration from time to time particularly after any known
knocks or drops. An easy way to continually check calibration is to always
double check you work with the laser located in a different position or use
an alternate vertical line. Various other methods for checking calibration can
be found at www.redbacklasers.com.au/downloads or the laser can
be returned to our service department for checking and re-calibration. We
at Redback Lasers provide a once off free calibration and check within the
duration of the warranty period see back cover for details.