red
PRACTIKA 28-33
USE AND INSTALLATION MANUAL
Chapter 3
page 10
Technical specifications and dimensions
Technical dept. - All rights reserved - Reproduction prohibited
3.2.
Description of the Practika 28-33 hot water boiler and automatic pellet
burner
The system consists of:
Hot water pellet boiler
Automatic pellet burner
3.3.
Description of the “Practika” hot water pellet boiler heat exchanger
The "PRACTIKA" hot water pellet boiler heat exchanger complies with the operating requirements of
this type of appliance, as set out in the operation standard:
EN 303-5/2000 –
The hot water boiler consists of the
following elements/modules:
The main component of the hot water boiler is the
heat exchanger
, which features a side
opening for the installation of the pellet burner. The heat exchanger is manufactured in two
versions - "
left
" – with the pellet burner installed on the left (looking at the boiler from the
front) and "
right
" – where the burner is installed in the opening of the heat exchanger on the
right (again looking at the boiler from the front).
