Red Hat Cluster Suite, Manual

Page: 77 / 188

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software 61
File System Type — Choose the file system for the resource using the drop-
down menu.
Mount Point
— Choose the path to which the file system resource is mounted.
Device
— Specify the device file associated with the file system resource.
Options — Options to pass to the call for the new file system.
File System ID — When creating a new file system resource, you can leave
this field blank. Leaving the field blank causes a file system ID to be assigned
automatically after you click OK at the Resource Configuration dialog box. If
you need to assign a file system ID explicitly, specify it in this field.
Checkboxes — Specify mount and unmount actions when a service is stopped
(for example, when disabling or relocating a service):
•
Force unmount — If checked, forces the file system to unmount. The default
setting is unchecked.
•
Reboot host node if unmount fails — If checked, reboots the node if un-
mounting this file system fails. The default setting is unchecked.
•
Check file system before mounting
— If checked, causes
fsck
to be run on
the file system before mounting it. The default setting is unchecked.
IP Address
IP Address — Type the IP address for the resource.
Monitor Link checkbox — Check the box to enable or disable link status mon-
itoring of the IP address resource
NFS Mount
Name
— Create a symobolic name for the NFS mount.
Mount Point
— Choose the path to which the file system resource is mounted.
Host
— Specify the NFS server name.
Export Path — NFS export on the server.
NFS and NFS4 options — Specify NFS protocol:
•
NFS — Specifies using NFSv3 protocol. The default setting is NFS .
•
NFS4 — Specifies using NFSv4 protocol.
Options — NFS-specific options to pass to the
call for the new file sys-
tem. For more information, refer to the nfs(5) man page.
Force Unmount
checkbox — If checked, forces the file system to unmount.
The default setting is unchecked.
mount
mount