Red Hat Cluster Suite, Manual

Page: 74 / 188

58 Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Figure 3-11. Failover Domain Configuration: Adjusting Priority
b. For each node that requires a priority adjustment, click the node listed in the
Member Node/Priority columns and adjust priority by clicking one of the
Adjust Priority
arrows. Priority is indicated by the position in the
Member
Node
column and the value in the
Priority
column. The node priorities are
listed highest to lowest, with the highest priority node at the top of the
Member
Node
column (having the lowest
Priority
number).
7. Click
Close
to create the domain.
8. At the
Cluster Configuration Tool
, perform one of the following actions depending
on whether the configuration is for a new cluster or for one that is operational and
running:
•
New cluster — If this is a new cluster, choose
File
=>
Save
to save the changes to
the cluster configuration.
•
Running cluster — If this cluster is operational and running, and you want to
propagate the change immediately, click the
Send to Cluster
button. Clicking
Send to Cluster automatically saves the configuration change. If you do not want
to propagate the change immediately, choose
File
=>
Save
to save the changes to
the cluster configuration.