Red Hat Cluster Suite Manual Download Page 146

Page: 146 / 188

130

Chapter 10. Configuring the LVS Routers with Piranha Configuration Tool

Weight

An integer value indicating this host’s capacity relative to that of other hosts in the

pool. The value can be arbitrary, but treat it as a ratio in relation to other real servers

in the cluster. For more on server weight, see Section 7.3.2

Server Weight and Schedul-

ing

Warning

Remember to click the

ACCEPT

button after making any changes in this panel. To make

sure you do not lose any changes when selecting a new panel.

10.6.3. EDIT MONITORING SCRIPTS Subsection

Click on the

MONITORING SCRIPTS

link at the top of the page. The

EDIT MONI-

TORING SCRIPTS

subsection allows the administrator to specify a send/expect string

sequence to verify that the service for the virtual server is functional on each real server. It

is also the place where the administrator can specify customized scripts to check services

requiring dynamically changing data.

Summary of Contents for Cluster Suite





























































































































































































Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands

Red Hat Cluster Suite, Manual

Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands