Red Hat Cluster Suite Manual Download Page 143

Page: 143 / 188

Chapter 10. Configuring the LVS Routers with Piranha Configuration Tool

127

Note

Before the advent of firewall marks, persistence limited by subnet was a crude way of

bundling connections. Now, it is best to use persistence in relation to firewall marks

to achieve the same result.

Warning

Remember to click the

ACCEPT

button after making any changes in this panel. To make

sure you do not lose changes when selecting a new panel.

10.6.2. REAL SERVER Subsection

Clicking on the

REAL SERVER

subsection link at the top of the panel displays the

EDIT

REAL SERVER

subsection. It displays the status of the physical server hosts for a partic-

ular virtual service.

Summary of Contents for Cluster Suite





























































































































































































Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands

Red Hat Cluster Suite, Manual

Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands