Red Hat Cluster Suite Manual Download Page 63

Page: 63 / 188

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software

Field

Description

Name

A name for the GNBD device used to fence the cluster. Note that

the GFS server must be accessed via GNBD for cluster node

fencing support.

Server

The hostname of each GNBD to disable. For multiple hostnames,

separate each hostname with a space.

Table 3-6. Configuring a Global Network Block Device (GNBD) fencing agent

Field

Description

Name

A name for the server with HP iLO support.

The login name used to access the device.

Password

The password used to authenticate the connection to the device.

Hostname

The hostname assigned to the device.

Table 3-7. Configuring an HP Integrated Lights Out (iLO) card

Field

Description

Name

A name for the IBM Bladecenter device connected to the cluster.

IP Address

The IP address assigned to the device.

The login name used to access the device.

Password

The password used to authenticate the connection to the device.

Table 3-8. Configuring an IBM Blade Center that Supports Telnet

Field

Description

Name

A name for the RSA device connected to the cluster.

IP Address

The IP address assigned to the device.

The login name used to access the device.

Password

The password used to authenticate the connection to the device.

Table 3-9. Configuring an IBM Remote Supervisor Adapter II (RSA II)

Summary of Contents for Cluster Suite





























































































































































































Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands

Red Hat Cluster Suite, Manual

Search results

Summary of Contents for Cluster Suite

Reviews:

Related manuals for Cluster Suite

Brands by name

Popular brands