Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION, Admin Manual

Page: 57 / 564

Editing Certificate Profiles in the Console
35
https://server.example.com:9445/ca/services
b. Click the
Manage Certificate Profiles
link. This page lists all of the certificate profiles that
have been set up by an administrator, both active and inactive.
c. Click the name of the certificate profile to approve.
d. At the bottom of the page, click the
Enable
button.
NOTE
If this profile will be used with an RA, then the RA must be configured, as well, so that
users can access the profile. This is in
Section 2.3, “Configuring Custom Enrollment
Profiles to Use with an RA”
.
If this profile will be used with a TPS, then the TPS must be configured to recognized the
profile type. This is in
Section 2.4, “Managing Smart Card CA Profiles”
.
Authorization methods for the profiles can only be added to the profile using the command line, as
described in
Section 2.2.3, “Creating and Editing Certificate Profiles through the Command Line”
.
2.2.2. Editing Certificate Profiles in the Console
To modify an existing certificate profile, select a certificate profile, click
Edit/View
.
The
Certificate Profile Rule Editor
window appears. If necessary, enlarge the window by pulling out
one of the corners of the window.
NOTE
The profile instance ID cannot be modified.
Once a certificate profile is enabled by an agent, that certificate profile is marked enabled in the
Certificate Profile Instance Management
tab, and the certificate profile cannot be edited in any way.
To edit that certificate profile, an agent must first disable the certificate profile.
Delete any certificate profiles that will not be approved by an agent. Any certificate profile that appears
in the
Certificate Profile Instance Management
tab also appears in the agent services interface. If