manualshive.com logo in svg

Red Hat CERTIFICATE 7.1 ADMINISTRATOR, Administrator'S Manual

Share
Download
Red Hat CERTIFICATE 7.1 ADMINISTRATOR Administrator'S Manual Download Page 339

ACL Reference

Chapter 9

Authorization

339

a.

Select Allow or Deny from the Access field to allow or deny the operation 
specified in this ACI to the group(s), user(s) or IP address(es) specified. For more 
information about allowing or denying access, see “Allow and Deny,” on page 
335.

b. 

Select one operator from the possible operators in the Operators list. You can 
select more than one operator for this ACI by holding down Ctrl and selecting all 
operators that will be included in the ACI. 

c. 

Specify the user, group, or IP address that will be granted or denied access to the 
selected operators by providing the correct syntax in the Syntax field. See 
“Syntax,” on page 336 for details on syntax. 

d. 

Click OK. 

7.

Click Refresh when you are done. 

ACL Reference

This section lists all ACL resources defined for all subsystems, describes what each 
resource controls, lists the possible operations describing the outcome of those operations, 
and provides the default ACIs for each ACL resource defined. Each subsystem you install 
will contain only those ACLs that are relevant to that subsystem. 

certServer.acl.configuration 

Allow or deny a read or modify operation to the ACL configuration.

Operations

Default ACIs

allow (read) group=”Administrators” || group=”Certificate Manager 

Agents” || group=”Registration Manager Agents” || group=”Data 

Recovery Manager Agents” || group=”Online Certificate Status Manager 

Agents” || group=Auditors

allow (modify) group=”Administrators”

read 

Viewing ACL resources and listing ACL resources, ACL listing 
evaluators, and ACL evaluator types. 

modify 

Adding, deleting, and updating ACL evaluators.

Summary of Contents for CERTIFICATE 7.1 ADMINISTRATOR









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands