RecoveryPump
®
Model 737R (RPX)
User Manual
Arm/Shoulder Garment
Note:
Remove any jewelry or wristwatches before putting on the arm sleeve.
a. Insert the arm into the sleeve.
b. Pull the sleeve over the shoulder to cover it.
c. Wrap the fastening strap around the body, under the untreated arm.
Fasten the strap and adjust the buckle for a comfortable fit.
RecoveryCore™
This garment massages the core areas (hips, buttocks, lower back).
Use the RecoveryCore™ in a reclined or supine position (lying face up).
Pillows may be used under the knees and/or ankles for comfort.
a. Put on the RecoveryCore™ garment while you are in a seated, half
seated, or lying position on a bed, wide couch, or in a recliner chair.
b. The RecoveryCore™ garment has three zipper fasteners on each side.
Fasten the garment on each side using the zipper that provides you
with a comfortable fit. The garment should not fit tightly.
c. Locate the two RecoveryCore™ hose bundles packed with the
garment. Attach both of the RecoveryCore™ hose bundles to the
garment, one to each side.
The RecoveryCore™ connector is printed with the
logo, and the
female hose bundle connector is printed with directional arrows. Fasten
them one to the other with the printed side of each facing UP.
d. Ensure the zippers on the RecoveryCore™ are closed completely
before turning on the RecoveryPump
®
console.
e. If you wish to increase contact of the massage chambers with your
upper gluteal/lower back area, use the shoulder straps. Pass the
shoulder straps over your shoulders and fasten them in the front.
f. Select a treatment pressure of up to 50 mmHg for use with the
RecoveryCore™ garment.
Caution:
•
Using pressure over 50 mmHg with the RecoveryCore™ garment is
not recommended.
•
If you are pregnant or suspect you may be pregnant, do not use the
RecoveryCore™ garment.
•
The RecoveryCore™ is not intended for use in a standing position.
Use it in a reclined or supine (lying face up) position.
L98005H1R-A
17
