RecoveryPump
®
Model 737R (RPX)
User Manual
Custom Programs
The RecoveryPump
®
console contains three custom programs. Each
custom program allows the user to select either the Sequential or ISO cycle
mode. The user can change the treatment parameters (pressure, time,
pause, and hold) during treatment, but not the selected cycle.
Factory Default Program Settings
The RecoveryPump
®
console is supplied with the following default program
settings.
Table 1 - Default Program Settings
Program
Cycle
Mode
Pressure
[mmHg]
Time
[min]
Pause
[sec]
Hold
[sec]
User Modification
1 - Recovery Sequential
70
45
15
4
Pressure, Time, Pause, and
Hold (see note below)
2 - Pre-Train Sequential
55
20
10
2
3 - Rehab
ISO
40
30
10
0
Pressure, Time, Pause, Hold,
and inflated cells in the ISO
cycle mode (see note below)
4 - Custom Sequential
60
20
10
2
Pressure, Time, Pause, Hold,
Cycle Mode (ISO or
Sequential), and inflated cells in
the ISO cycle mode (see note
below)
5 - Custom Sequential
60
40
10
4
6 - Custom Sequential
60
60
15
6
Note:
All programs - The user can change Pressure, Time, Pause, and Hold
before or during treatment.
•
Programs 1, 2, and 3 - The Pressure, Time, Pause, and Hold
parameters return to factory default settings after treatment.
•
Program 3 - The user can select the pair of cells to be inflated in the
ISO cycle mode (1 & 2, 2 & 3, or 3 & 4).
•
Programs 4, 5, and 6 - The user can select the Cycle Mode, which is
modifiable only before or after treatment, and the pair of cells to be
inflated in the ISO cycle mode (1 & 2, 2 & 3, or 3 & 4). These programs
are saved.
To return to the default program settings, press and hold both
Up
and
Down
buttons until the buzzer beeps twice.
8
L98005H1R-A
