RecoveryPump
®
Model 737R (RPX)
User Manual
The Rehab Program
The Rehab program uses the ISO cycle mode that applies a directional
massage to a smaller area. Only two adjacent cells in the garment are
inflated. The first cell inflates, and after a few seconds, the second cell starts
to inflate until both cells reach the set pressure. Then both cells deflate, and
after a pause the process starts again (see Figure 2).
The user can select the pair of cells to be inflated (1 & 2, 2 & 3, or 3 & 4)
Cells 1 & 2
Cells 2 & 3
Cells 3 & 4
Figure 2 - ISO Cycle Mode
L98005H1R-A
7
