REC Peak Energy 72 Installation Manual - UL 1703
Rev C.3 - 02.16
Ref: NE-06-06-C
3
INtRoDuCtIoN
thank you for choosing ReC photovoltaic panels. ReC Peak energy 72 panels are ideal for delivering long-lasting and reliable power output.
the panels have been created through intelligent design and are manufactured to the highest quality and environmental standards. with
correct installation and maintenance, ReC panels will provide clean, renewable energy for many years.
Please read this entire manual carefully. It contains critical information on safety, as well as detailed instructions for installation, operation
and maintenance of this panel. failure to follow the procedures contained within will invalidate the warranty. Review all instructions and
safety notes before working on the system. failure to do so may lead to injury or damage to property.
How to usE tHIs manual
this installation manual describes the installation procedures for the mounting in a photovoltaic array of all ReC solar panels with the moniker
ReC Peak energy 72 (including both the ReC Peak energy 72 series and ReC Peak energy 72 xv series variants), which have been certified
according to uL 1703 standards. the installed panel is only considered to be in compliance with uL 1703, only when mounted in the manner
specified by the instructions below. Note that any panel without a frame (laminate) is not considered to comply with the requirements of
uL 1703 unless mechanically installed with hardware that has been tested and evaluated with the panel under this standard or by a field
inspection certifying that the installed panel complies with the requirements of uL 1703.
Review the entire manual before installing the panels and ensure you are working from the latest version. throughout the manual, you will
see the below icons which highlight important information or notes:
Indicates potential for damage to the array or property or personal safety.
Indicates important notes on best practice to help with the installation or to avoid potential damage to the panels, array or
property.
for further information on installation procedures, please call your distributor or contact your local ReC solar office. Details available at
www.recgroup.com.
youR REsponsIbIlIty as an InstallER
Installers are responsible for the safe and effective installation and operation of the photovoltaic system and for adhering to all local and
national standards and regulations. Prior to installation, check all applicable regulations and permits concerning solar systems and ensure all
local directives are observed.
•
ensure the ReC Peak energy 72 solar panels are in a suitable condition for use and appropriate for the particular installation and
environment
•
use only parts that convene to the specifications set out in this manual
•
ensure a safe installation of all aspects of the electrical array
All equipment should be properly maintained and inspected prior to use.
suppoRt
Do not attempt to install when you are unsure of the procedure or suitability. for questions or guidance with your installation, please call
your distributor or contact your ReC sales office, which can be found at: www.recgroup.com/en/contacts.
lIabIlIty DIsClaImER
ReC soLAR Pte. LtD. accepts no liability for the usability and functionality of its photovoltaic panels if the instructions in this guide are not
followed. since compliance with this guide and the conditions and methods of installation, operation, use and maintenance of the panels are
not checked or monitored by ReC soLAR Pte. LtD., ReC soLAR Pte. LtD. accepts no liability for damage arising from improper application
or incorrect installation, use, operation or maintenance. this does not apply to damages due to a panel fault, in cases of loss of life, bodily
injury or damage to health or in the event of a grossly negligent breach of obligations on the part of ReC soLAR Pte. LtD. and/or in the event
of an intentional or grossly negligent breach of obligations by a legal representative or vicarious agent.
