56
6. Remove pilot orifice from pilot or replace whole pilot
assembly with correct gas type.
INJECTOR AND PILOT REMOVAL INSTRUCTIONS
(continued)
PILOT REFITMENT
1. Replace pilot orifice with correct gas type.
2. Refit pilot gas pipe and tighten.
3. Refit spark probe and gently tightly
4. Refit spark lead
5. Push pilot assembly down to original position and refit the
bracket retaining screw.
6. Check all wires are sitting correctly, flush to front wall.
Ensure spark lead is not broken or excessively bent.
Ensure lead hole is still sealed. (High temperature silicon is
suitable for resealing.)
Summary of Contents for ELEMENT 1800 DOUBLE SIDED
