Real Flame ELEMENT 1800 DOUBLE SIDED, Installation & Operating Manual, Page: 34 / 60

34
• Spread glass pebbles over the media support tray, ensure no pebbles are inside the media
retainer area and the burner channel. Spread out over area.
• Lay forest log media in a random arrangement along the entire length of the burner.
• Avoid smothering the burner channel. (log media may cross over the burner channel
but not run along the channel)
• Randomly place ash flakes on top of glass (ensure no flakes are obstructing or located in
the burner channel)
• Ensure media is not heaped in areas, spread evenly along.
• Do not add extra media, or combine media types.
• Do not cover pilot area.
• Do not overfill with media above the pilot cover level.
• Ensure the pilot flame is not impinged by media and can cross light the main burner.
• Do not use any other media than as supplied and recommended by the manufacturer.
• Use of other media may result in explosive media which may cause injury or damage.
MEDIA INSTALLATION
(continued)
Forestwood with glass pebbles
• Ensure media retainer is fitted to burner. Burner flame slot should be located centrally.
Typical setup
IMPORTANT - Do not cover or block pilot area.