Real Flame ELEMENT 1800 DOUBLE SIDED, Installation & Operating Manual, Page: 48 / 60

48
WIFI DEVICE CONTROL INSTRUCTIONS
(continued)
Pushing the Fireplace to a different home or local network after initial install
Pushing the Fireplace to a different home or local network after it has previously been set up, is
done at Fireplace power on, when the fireplace is powered off at the Main switch, upon being
powered on, the Fireplace will show its Access point (Realflame_XXXXXX) for 30 seconds.
If you join the access point with your mobile device, you will be able to change the network the
Fireplace is currently connected with via the mobile App.
If you do not join the Access point the Fireplace will join the network that is has settings saved for
or if there are no settings, it will stay in Access Point mode.
Note:
If you join the access point by accident on power on, you can simply power off the Fireplace
and power on again, after the 30 seconds the Fireplace will join the network with its saved settings
Note:
If not connected to wifi you can still control the fire via 4G or 5G network.
AUTO MODE - Only available via the remote.