Page 16
Terminals Explained
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
Terminals Explained
The Thalia control board has many features and
programmable options. Please reference page 32-
35 for the full programming menu.
Navigating the Menu:
1.
Press [OK] twice to get into the programming
menu
• “HALT” will appear on the display
2.
Press [OK] twice again
•
“PARAM” will appear on the display
3.
Once you reach the desired menu option using
the [+] or [-] buttons
•
Press [OK]
4.
Scroll until you reach the selection that needs
programming
•
Press [OK]
5. Adjust the value as needed
•
Press [OK]
6. To exit the menu press [+] and [-] once or twice
(twice completely exits out of the programming
menu)
Command Inputs
The Thalia control
provides two command
inputs (“IC1” and “IC2”).
Terminal
Name
Descrip
-
tion
Default
60
COM
Command
positive
common
common
61
IC 1
Command
Input 1
START
62
IC 2
Command
Input 2
PED
Command input 1 and 2 can be re-programmed to
perform any of the following instructions:
Range Value
for IC1 and IC2
Function
Description
001
START
Cycles be
-
tween open,
stop and close.
Normally used
with single
push-buttons
and radio
receivers
002
OPEN
Open only.
Used with
[open] but
-
tons, free exit
and/or open
only devices
003
CLOSE
Close only.
Used with
[close] buttons
and closing
loop detectors
