8
TO...
THIS IS THE SCREENSHOT TO REFER
TO
INFORMATION ON:
Type of Hardware, board address, type of program,
program version.
i
E
Info: Address:1
Ident:001
Board:UC2
Device:WI-SA
Rel: X.X.X
Design
Release: <MM-YYYY>
DISPLAY THE MAIN SCREENSHOT
Program version, Season, General Activation, Date.
0
2.2
───┬───────────┬──────
Sat│21│May │2016
SWITCH OFF ALL SYSTEMS
Off: Control unit general switch-off
On: Control unit general start-up
N.B. Screenshot present only in configurations with more than
one mixing system
1
GEN.ON-OFF:
──────────────────────
On
──────────────────────
Activation Off-On
General
MANAGE SYSTEMS AND ZONES
System-Zone function selection menu:
Status / Set / Readouts / Programming
2
<<SYST-ZONE MENU>>
Systems/Zones Menu
MODIFY THE SYSTEM
(ON/OFF)
AND
ZONE
(ON/OFF/PGM/PGM-MAN)
STATUS
2.1
[SYST-ZONE STATUS]
Set System and zone
start-up mode
MODIFY THE SYSTEM STATUS
Off: System and associated zones switch-off (the system is
automatically activated when the control unit detects a temperature
lower than 5°C – anti-freeze function)
On: System activation.
2.1.1
SYSTEM STATUS 01
──────────────────────
SYS[1] On
No:08 Zones *
──────────────────────
Activation Status
Systems and Zones
MODIFY A ZONE STATUS AND
ITS REMOTE TERMINAL BLOCK
Off: Zone switch-off.
Man: Zone start-up according to the settings.
Pgm: Zone in programming mode (Zone start-up according to the
timeslots and set point set in the programming menu).
Pgm/Man: Zone in manual programming mode (Zone start-up
according to the timeslots set in the programming menu and
temperatures set manually).
Unlocked: Allows modifying the settings from the remote
terminals.
Locked: Inhibits the option to modify the settings from the
remote terminals.
2.1.1.1
ZONE 2 ZONE STATUS
----------------------
Unlocked
──────────────────────
Zone status and
block setting
FUNCTIONAL OVERVIEW OF THE SCREENSHOT
