2 SY
STEM
/ Z
ONE
MENU
21
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
2.2
S
YSTEM
/Z
ONE
SET
SCREENSHOT
[SET SYST-ZONE]
Set system and Zone
values
Table of movements
Button
Screenshot
0
MAIN
2.1
SYSTEM/ZONE STATUS
2.2.1 SET VALUES
2.3
SYSTEM/ZONE READOUTS
Menu 2.2 “System/Zone Set” allows modifying the operating
parameters that characterise the system and the zones.
System variations: you can set the variation to introduce in the
system delivery temperature calculation (parallel shift).
Zone variations: if the zone operates in Manual mode, you can
set at which temperature and humidity it must be configured.
Example:
If you want "zone 1" to operate in Manual mode (to be set
through menu 2.1 “ System / Zone Status"), at 24°C -> you must
set this value in menu 2.2.1.2 “ Zone set values".
When in "zone 1" the temperature drops below the set value,
heating is activated and will turn off once a temperature of
24°C is reached.
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
/ 2.2 S
YSTEM
-Z
ONE
S
ET
/
2.2.1
S
ET
V
ALUES
S
CREENSHOT
Table of movements
Button
Screenshot
2.2
SYSTEM/ZONE SET
2.2.1.1 PARALLEL SHIFTING
2.2.1.2 ZONE SET VALUES
2.2.1.3 DEHUMIDIFIERS
2.2.1.4 UxBUS_xx
This section allows modifying the operating parameters that
characterise the system, zones and air handling units.
Table of variables
No. Description
1
When it flashes you can access the "Parallel shifting"
screenshot
2
When it flashes you can access the "Zone Set Values"
screenshot
3
When it flashes you can access the “AHU Set Values”
screenshot
4
When it flashes you can access the "UxBUS_xx"
screenshot
By accessing the system setting subscreenshot, you can set the
"Parallel shifting" parameter according to the season operating
mode.
This parameter manages the shift that can be introduced in the
system delivery temperature calculation obtained through the
compensation line.
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
/ 2.2 S
YSTEM
-Z
ONE
S
ET
/ 2.2.1 S
ET
V
ALUES
/
2.2.1.1
P
ARALLEL
S
HIFTING
S
CREENSHOT
SYS[1] Set Sum
Parallel shift:0.0°C
ID-Remote:*
──────────────────────
System set
Table of movements
Button
Screenshot
2.2.1
SET VALUES
2.2.1.1.1 DIGITAL INPUTS
Table of variables
No. Description
1
When it flashes you can modify the value
2
When it flashes you can access the "Type of Signal"
screenshot
2
1
SET VALUES
──────────────────────
SYS[1] *
N°:02 Zones *
AHU * UxBUS_xx *
──────────────────────
Modify system & zone
set values
1
2
4
3
