12
DA PARAMETERES READINGS for selected Ux:
Superheat Temp: Overheating temperature
H2O P Pos.Valv.: Position of the water valve for the pre-treatment
coil
H2O C Pos.Valv.: Position of the water valve of the condensation
coil
2.3.1.4.1.4
UxBUS_01 UC11
Parameters Readings
Superheat Temp: 00.0
°c
H2O P Pos.Valv.: 100%
H2O C Pos.Valv.: 100%
UNIT INFO READINGS:
Free Cooling connection type.
Pre: Free Cooling air inlet before coils.
Post: Free Cooling air inlet after coils.
2.3.1.4.1.5
UxBUS_01 UC11
Unit Info
FreeCooling: Pre
GENERAL INFORMATION for SELECTED Ux:
ID Ux: Modbus net index.
Model: Ux Model.
Ver: Software version installed.
Rev: Software revision installed.
2.3.1.4.1.6
UxBUS_01 UC11
Readings
ID UxBUS:09 - Modbus
Modello:-
Rel:xxx
Rev:0000
WEEKLY PROGRAM
2.4
[SYST-ZONE PROGRAM]
Programming the
Timeslots
SELECT THE SYSTEM TO BE PROGRAMMED
2.4.1
PROGRAMMING
SYSTEM
─────SYS[1]──────
N°:08 Zones
──────────────────────
Set programs
for selected system
SELECT PROGRAMMING
T: Temperature
D: Dehumidification (summer) / H: Humidification (winter)
V: Ventilation
R : Air renewal
E: System economy
ECO UCxx: UCxx economy
AUX1: Auxiliary chrono 1
AUX2: Auxiliary chrono 2
2.4.1.1
2.4.1.2
2.4.1.3
2.4.1.4
2.4.1.5
2.4.1.6
2.4.1.7
2.4.1.8
TEMPERATURE
Modifying system
and zone set values
CONF/ECO
Modifying system
and zone set values
MODIFY A PROGRAM OR SET A WEEK
2.4.1.1.1
2.4.1.2.1
2.4.1.3.1
2.4.1.4.1
TPR/Week ZONE Tmp
──────────────────────
Program type *
Weekly program *
──────────────────────
SET A PROGRAM
Standard (STD), Weekday (WD), Weekend (WE), etc...
Copy a program
2.4.1.1.1.1
2.4.1.2.1.1
2.4.1.3.1.1
2.4.1.4.1.1
From To 27.0
Tmp│07:30│12:00│25.0
Sum│13:00│17:00│24.0
Std│19:00│22:30│26.0
│ │ │
──────────────────────
Program timeslots
