RDZ WI-SA Technical Manual Download Page 4

Page: 4 / 56

CONTENTS

PRESENTATION

WI control unit is customisable and can be used to manage up to 8 mixing systems, 64 climate

zones with 64 independent dehumidifiers and control up to 8 air handling units (AHU) with the

dehumidification, ventilation, air renewal and integration functions.

Moreover, it can be used in the following operating modes:

•

AUTONOMOUS MODE: to be installed on systems with independent power production.

•

SLAVE MODE: to be installed on systems with centralised power production. This

configuration provides for the use of WI.MASTER.NET control unit.

The illustrated user manual describes all the possible operating modes.

Description

Page

Presentation

General description

Summary overview of the screenshot

Functional overview of the screenshot

Actions on the menus

- INFO Menu screenshot

0 - Main screenshot

1 - general On-Off screenshot (in the event of multi-systems)

2 - System/Zone Menu Screenshot

3 - Settings Menu Screenshot

Troubleshooting

Summary of Contents for WI-SA

























































Search results

Summary of Contents for WI-SA

Reviews:

Related manuals for WI-SA

Brands by name

Popular brands

RDZ WI-SA, Technical Manual

Search results

Summary of Contents for WI-SA

Reviews:

Related manuals for WI-SA

Brands by name

Popular brands