RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
48
The operation method is the same as manual setting.
When “Continue” item is selected, then the “Laser time” item is not valid, on that time,
push the Laser key to splash the enabled lasers, and when Laser key is loosed, then the
lasers will finish splashing. When the Laser mode item is “Manual”, then pushing the Laser
key one time, the enabled lasers will splash a fixed time.
8.6.5 Spray setting
Select the "spray setting" entry under the funtions interface, press the
<Enter>
key, and
then pop up the interface as follows:
When “Continue” item is selected, then the “Spray time” item is not valid, on that time, push the
Spray key to splash the enabled spray, and when Spray key is loosed, then the spray will finish splashing.
When the Laser mode item is “Manual”, then pushing the Laser key one time, the enabled spray will glue a
fixed time.
Figure 8.6.4
Figure 8.6.5