HARDWIRED LOAD CONTROL MODULE
Cat. No. 72A00-1
Installation Instructions and User’s Guide
INSTALLATION
ENGLISH
DI-021-OA721-00A
AR2243
DI-021-OA721-00A
AR2243
DESCRIPTION
The Hardwired Load Control Module controls the power consumption of high wattage loads, such as water heaters, pool pumps, baseboard heaters, ventilators, humidifier, and
dehumidifier. It can also control commercial lighting (e.g. 277 VAC lighting ballasts),
vent fans, circulator pumps, sign lighting, and outdoor lighting.
The Hardwired Load Control Module can be operated by using voltage outputs on an Leviton controller or expansion enclosure, and features a manual override switch.
Optoisolated relays in the 72A00-1 isolate noisy loads from the Leviton system.
WIRING DIAGRAMS
Note: This device should be connected only by a qualified electrician.
Figure 1 - Connecting to a 120 VAC Load
Barrier Strip
Manual Override Switch
- On
- Off
- Output Controlled
Opto-isolator
Barrier Strip
Manual Override Switch
- On
- Off
- Output Controlled
Opto-isolator
WARNINGS AND CAUTIONS
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER at circuit breaker or
fuse and test that power is off before wiring!
• If you are unsure about any part of these instructions, consult an electrician.
• SAVE THESE INSTRUCTIONS.
WARNINGS AND CAUTIONS
• To be installed and/or used in accordance with appropriate electrical codes and
regulations.
• Use this device with
copper or copper-clad wire only.
• For indoor use only.
(72I00-1)
WEB
VERSION
