RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
52
When showing this menu, the system would read the memory file firstly, the file name
and the work times would be listed in the area, and the selected file is previewed in the
bottom right area.
<Up >/<Down>
keys could be used to move the cursor on the file name list.
When the cursor is on a target file name, presses the
<Enter>
key, the selected file will be
previewed on the main interface, and then if
<Esc>
key is pushed, the preview will disappear.
<Left>/<Right>
keys could be used to move the cursor left and right.
Press the
<Esc>
key to return to the previous menu.
The items on the right and bottom are as follows:
Run
: To run the selected file;
Track
: To track the selected file, and the track mode is optional;
Work time
: To forecast the running time of the selected file, and the time is
accurate to 1ms;
Clear count
: To clear the running times of the selected file;
Copy to U disk
: To copy the selected file to U disk;
Delete
: To delete the selected file in the memory;
U disk
: read the U disk file list;
Memery operation
: the other operation of the memory files;
Read mem file
: read the memory file list;
8.7.2 Array info
Select the "Array info" entry in the above interface and press the
<Enter>
button, then
the pop-up menu appears as follows:
At this time, press the [up and down direction keys] to select the array. When the total
number of arrays is greater than or equal to 2, the array information setting interface cannot
Figure 8.7.2-1
