RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
53
be operated. After selecting, press [Enter] to enter the array information setting interface as
shown below:
At this time, the "blue selection block" stays on the first parameter to indicate that the
parameter is selected, and the number key and the delete key can be used to set and
modify the parameters. Press the arrow keys to move the “Select Block” and select other
parameters to modify. When the parameters are modified, press [OK] to save the
parameters, press [Exit] to cancel the modification parameters, the interface disappears,
and return to the upper interface.
8.7.3 Feeding para
Select the "Feeding para" entry in the above interface and press the
<Enter>
button,
then the pop-up menu appears as follows:
At this time, the "blue selection block" stays on the first parameter to indicate that the
parameter is selected, and the number key and the delete key can be used to set and modify
the parameters. Press the arrow keys to move the “Select Block” and select other parameters
to modify. When the parameters are modified, press [OK] to save the parameters, press [Exit]
to cancel the modification parameters, the interface disappears and return to the upper
interface.
Figure 8.7.2-2
Figure 8.7.3
