RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
66
direction to another. On selecting one-way array, the elements of each array are the same in
action mode and completely uniform in action fluency, which takes a little more time than
two-way array. Two-way array is the default option.
Back Position
: The origin (the relative origin) and the machine
’
s absolute origin can be
selected. This parameter decides the parking position of laser head after each work.
Backlash X
: The X axes
’
backlash, accurate to 1um.
Backlash Y
: The Y axes
’
backlash, accurate to 1um.
Work Speed of Z~D axes
: the speed of each axes in work.
Focus Setting
: it means the distance from the focal point of laser head lens to Z-axle
origin. When there is no automatic focusing function, this parameter becomes invalid.
（
7
）
Rotating parameters
Enable Rotating
: If enable the rotating function of Y axis. If this parameter is enabled,
the controller calculates the Y step length based on the circle pulse and the diameter of the
work piece.
Circle pulse
: the total pulse number sent by controller to make rotation axis finish one
circle.
Diameter
: The diameter of processing material which connected with rotation axis.
●
Test
: Press the button, fill it with speed value, start test of rotation axis. If the circle pulse is
correct, the rotation axis can just finish one circle with it. This test can confirm the circle pulse number by
testing if the circle pulse is correct.
（
8
）
Wireless panel parameters
Enable Speed shift
: if the option is
‘
no
’
, the axis speed of wireless keyboard
movement is the speed value displayed on screen. If the option is
‘
yes
’
, the axis speed of
wireless keyboard movement is the speed value of fast movement or slow movement.
Fast moving(mm/s)
: The fast grade speed when wireless keyboard axis moving.
Slow moving(mm/s)
: The slow grade speed when wireless keyboard axis moving.
（
9
）
Spraying Parameters
Point spraying mode
：
when "continuous" is selected, press the [point spraying] button
to start point spraying, and stop point spraying when it pops up; if "point spraying" is selected,
press the [point spraying] button every time to carry out point spraying for a fixed time, which
can be set.
