EPSILON ES2,ES4
9
4.3 Сonsumables and tools for sensor’s installation and calibration
Consumables and tools for sensor’s installation and calibration can be supplied on special
request (see section 6).
5. LIST OF DOCUMENTS AND SOFTWARE FOR SENSOR’S
INSTALLATION AND CALIBRATION
● Passport
ES.402 ПС.
● Service manual*
ES.401 РЭ.
● User’s software on CD disk**
ES.000 CD1
* - 1 manual with 10 sensors is supplied
** - supplied on special request
6. LIST OF DEVICES AND EQUIPMENT FOR SENSOR’S
INSTALLATION AND CALIBRATION
6.1
Instrumentation
Table.4
Name
Quantity
1) Multimeter M890G
1
2) Tape measure 3 m
1
3) Measuring cup or flow meter, providing measuring errors of fuel
volume not worse than ± 0,1%
1
6.2 Equipment, tools and consumables
Table.5
Name
Quantity
1)
Metal cutting tool for holes making Ø22 ± 0,5 mm in the
sheet material of the tank surface. Preferably produced by RUKO:
a.
For hydraulic hole punching:
a set 5 hydraulic, article 109 009,
b. For drilling:
carbide crown drill Ø22, article 105 022.
1 set
2) Electric drill with holder of clamping of the tool shank with
diameter NLT 10 mm.
1
3) The network extender in polyurethane insulation, 220V, 4А.
1
4) Pipe cutter is used when necessary to reduce the length of the
1
