Installing the outer and inner unit
NoKey Force – Installing and Operating
26
4.12
Remove the transport protection by
pulling it out straight, not to the side.
4.13
Check the handle function from the
outside. The lock is always unlocked
until it is put into operation.
If something is sticking, this could be
because:
•
the lock or square pin does not
have enough clearance against
the door or lock housing.
Compare with the description
on page 8.
•
The square pin is too long.
•
Wrong square pin.
•
The door's inner and outer sides
are not parallel.
•
Faulty lock housing.
4.14
Fit the contact in the circuit board.
