Installing the outer and inner unit
NoKey Force – Installing and Operating
14
4.14
Check the handle function from the
outside. The lock is always unlocked
until it is put into operation.
If something is sticking, this could be
because:
•
the lock or square pin does not have
enough clearance against the door or
lock housing. Compare with the
description on page 8.
•
The square pin is too long.
•
Wrong square pin.
•
The door's inner and outer sides are
not parallel.
•
Faulty lock housing.
4.15
Fit the contact in the circuit board.
4.16
Fold the cable double and place it under
the load holder.
Insert the batteries (5 x AA) into the
battery compartment.
