Installing the outer and inner unit
NoKey Force – Installing and Operating
16
Model KC03, with cylinder on the outside of the door
This describes the installation of an outer unit with cylinder together with an inner unit with a
knob.
For installation of NoKey force KC02 go to page 23!
To simplify the process for the installer, the lock is always unlocked until it is in operation.
4.1
Thread the cabling from the outer unit
through the door under the lock
housing.
Ensure there is enough space. If not,
adjustments must be made –
see page 8.
4.2
Insert a cable tie through the cylinder
hole and door leaf to temporarily
secure the outer unit.
4.3
Loosen and remove the cover from the
inner unit.
(Allen 3 mm)
Save the screws for later re-installation.
