Installing the outer and inner unit
NoKey Force – Installing and Operating
10
4 Installing the outer and inner unit
Models K01 and K03, without cylinders
This describes the installation of an outer unit without lock cylinder together with an inner unit
without a knob.
For installation of NoKey force KC03 go to page 16, for KC02 go to page 23!
To simplify the process for the installer, the lock is always unlocked until it is in operation.
4.1
Thread the cabling from the outer unit
through the door under the lock
housing.
Ensure there is enough space. If not,
adjustments must be made –
see page 8.
4.2
Insert a lock screw in one of the upper
holes to temporarily secure the outer
unit.
4.3
Loosen and remove the cover from the
inner unit.
(Allen 3 mm)
Save the screws for later re-installation.
