28
6.8
DATE/TIME
In
PRG
(4 + KEY) press
[IZN]
until
Date/Time
is displayed. Press
[SK.NAUDA] to start programming (after the daily report):
A) Enter a value from 1 trough 31
referred to today, then press
[SK.NAUDA]
B) Enter a value from 1 to 12
referred to this month then press
[SK.NAUDA]
C) Enter this year with 4 digits,
then press [SK.NAUDA]
D) Enter a value from 0 to 23
referred to the current time, and
then press [SK.NAUDA]
E) Enter a value from 0 to 59
referred to the minutes of the
current hour, and then press
[SK.NAUDA]
The display exits the programming displaying again “
Date/Time
”
.
To exit press [ATM] .
NOTE: if the display, after entering the date and the time, showed the
following message, it would mean that any set date, in respect of the last
daily report done, is higher than three days.
DAY:
1
MONTH:
10
YEAR:
2016
HOURS:
8
MINUTES:
30
Summary of Contents for Walle Mec
Page 1: ...OPERATING MANUAL...
