background image

http://www.ia.omron.com/

1

(c)Copyright OMRON Corporation 2007   All Rights Reserved. 

Total Counter/Time Counter (DIN 72 x 36)

H7HP

Compact Total Counters and Time Counters 
with Easy-to-read Displays and IP66G/
NEMA4 Water and Oil Resistance

• Large, easy-to-read displays: 15-mm-high characters for 6-digit 

models; 12-mm-high characters for 8-digit models.

• High-visibility, negative transmissive LCD display with built-in 

red LED backlight at low power consumption.

• Compact (66 mm) body.

• Switch 6-digit models between total counter and time counter 

operation.

Model Number Structure

Model Number Legend

1. Classification

A:

Total counter/time counter

C:

Total counter

2. Digits

None: 6 digits
8:

8 digits

3. Supply Voltage

None: 100 to 240 VAC
D:

12 to 24 VDC

4. Case Color

None: Light gray (Munsell 5Y7/1)
B:

Black

Ordering Information

List of Models

1   2  3  4

H7HP-

@@@@

Supply voltage

6-digit total counter/time counter

8-digit total counter

Light gray

Black

Light gray

Black

100 to 240 VAC

H7HP-A

H7HP-AB

H7HP-C8

H7HP-C8B

12 to 24 VDC

H7HP-AD

H7HP-ADB

H7HP-C8D

H7HP-C8DB

Summary of Contents for H7HP -











Reviews: