12
3.4
CONNECTION TO THE ELECTRIC MAIN
To connect the cash register to the mains, it is necessary to carry out
the following operations.
1. Make sure the power cable
plug is not connected to the
power socket.
2. Verify that the switch in the
lower front side is placed in
the OFF position (OFF).
FIG.1
3. Plug the power cable into the
IEC connector on the power
supply; both must be those
supplied with the product.
Supply:
Input: 100-240V 50-60 Hz
Output: 7V
3.4 A
FIG.2
4. Insert the DC power supply
connector to the printer power
connector (Fig. 3).
5. Plug the power cable into an
power socket.
6. WARNING! When connecting
or disconnecting the plug,
always hold the plug, not the
cable.
7. Turn on the system using the
switch on the front bottom of
the machine (Fig.1).
FIG.3
Summary of Contents for Walle Mec
Page 1: ...OPERATING MANUAL...
