RCH Walle Mec, Operating Manual

Page: 19 / 70

19
5 DISPLAY AND VIEWING
WALL E MEC
is supplied with two displays, one on the clerk’s side and the other
on the customer’s side.
Clerk’s display: 2 alphanumerical lines x 20 characters (fig. 1)
Customer’s display: 2 alphanumerical lines x 20 characters
(Fig. 1) Clerk
’s display
5.1
MODES INDICATION’
To select a mode it suffice to enter the number of the mode to activate
followed by the key KEY (KEY) . (As an example, to set up the
programming: 4 and KEY ). When we are in a mode other than
Recording, it is possible to select one of the functions wished for through
the two sliding keys [IZN] e [%-].According to the mode where the
machine is, the clerk’s display will inform of it by displaying the related
identification on the upper left hand.
Once the menu is accessed
through the keys [IZN] or [%-], the
display shows on the upper line the
type of display that may be
selected through sliding (see the
following figure carrying an
example of display in Z mode).
To exit, press the key [ATM].
MODALITIES DESCRIPTION
0 KEY Keypad locking
1 KEY REG Operating mode (recording)
2 KEY X
Reading with daily reports
– statistics
3 KEY Z
Printout/ daily reportsof the financial, of the cash counter sold,
etc.
4 KEY PRG Programming ( PLU, Departments, Financial, etc.)
CASH
12,60
PRG
0
-Z DAILY REPORT-
Daily Reset