70
15 INFORMATIONS FOR USERS
15.1 INTERNAL BATTERY REMOVAL
RECHARGEABLE LITHIUM BATTERY
ATTENTION!
The procedures below must be performed only by an authorized
technician.
Follow the instructions to remove the battery from the board (Fig.1)
1. Always disconnect from power supply
2. Locate on the back board the two plots on which the battery is
soldered
3. Bring the tip of the soldering iron to the pond at the two plots
where the battery is welded (Fig.2)
4. When the tin becomes liquid, you can remove the battery, pull up
the leads from the two holes on the motherboard.
FIG.1 FIG. 2
Rel. LTV 02/17 V.05
Summary of Contents for Walle Mec
Page 1: ...OPERATING MANUAL...
