68
E42
"DAILY NET OVERFLOW [CL] "
The SALES adding machine has reached its limit. Close or
cancel the current receipt and perform a daily report.
E43
“PROGR NET OVERFLOW [CL] "
The Cash counter has reached the maximum value that may
be reached as Grand Total. Close or cancel the current
receipt and ask for service.
E44
"ITEMS OVERFLOW [CL] "
It indicates it has reached the maximum number of items that
may be recorded onto the current receipt. Close the receipt
and open a new one to record the missing items.
E45
“CHANGE NOT ADMITED [CL] "
The closing total utilised is programmed not to accept any
change. Use another Total or re-program the one used.
E51
“FISCAL MEMORY ALREADY SET”
It is not possible to carry out the serialization procedure
(already done by the builder).
E52
"DATA NOT CLEARED [CL] "
It indicates that before continuing performing a daily reportis
mandatory.
E53
"PREVIOUS DATE [CL] "
It indicates that during the cash counter reinstatement, a date
prior to the last daily reporthas been entered.
E54
“NO DAILY REPORT [CL] ”
It indicate that you haven’t done the daily report about the
day before. Do a daily report.
E60
"PAPER OUT Press [CL] "
It indicates that the paper roll has finished. Replace the roll
paper as indicated in chapter 12 of the operating manual.
E61
“HEAD ERROR Press [CL] "
It indicates that the thermal head connector (printer) is
disconnected from the printer logic card.
E62
“POWER ERROR Press [CL] "
It indicates that the cash counter is improperly fed. Contact
service centre to verify the feeder.
E63
“PRINTER ERROR Press [CL] "
It indicates anomalous printer operations. It may indicate the
incorrect closing of the upper part or that some connectors
are disconnected from the logic card. Should the problem
continue, contact service centre.
Summary of Contents for Walle Mec
Page 1: ...OPERATING MANUAL...
