63
12 REPLACEMENT OF THE PAPER ROLL
The cash counter is set to signal the end of the paper through a sensor.
When during the printout the sensor detects the absence of paper the
display will show:
replace the paper roll (refer to
following procedure) and press
CL to continue the recordings.
To avoid changing the paper roll with an open receipt, it is preferable to
change it upon the coloured strips appear.
Note: it is possible using the function RECEIPT VOID to cancel the
current receipt and to issue a full new one, recording again the items.
To properly replace the paper roll, follow the procedure:
Take away the two parts of the cover applying the force on the
specific side slots
Open the inside cap that
contains the paper roll, putting
the fingers in the specific port
and applying force towards the
upper part to lift the cover
Remove the core of the paper roll
Insert a new paper roll and let
the upper edge exit
Close the cap and hear the closing click.
Reposition the upper cover
Continue the recordings.
E60: PAPER OUT
Press [CL]
Summary of Contents for Walle Mec
Page 1: ...OPERATING MANUAL...
