DOCUMENTATION RESERVED FOR RCH SERVICE CENTERS.
RCH TOUCH ME
- -
9
2.5 BATTERY VOLTAGE
This function allows to visualize current battery voltage on the display.
In the
SVR
mode (5 and [KEY]), repeatedly press the
[+%]
key to visualize
“
Battery
Voltage”
,
and
press the [CASH] key to visualize the value.
To exit the menu press [Void].
2.6 TEMPERATURE SENSOR
This function allows to enable the current temperature of the room on the Operator’s
display.
In the
SVR
mode (5 and [KEY]), repeatedly press the
[+%]
key to visualize
“
Temp.
sensor ”
.
A)Press [CASH]
B) The OFF value is preset for the TOUCH ME device;
press [%-] and the [CASH] key to enable the
visualization on the Operator’s display, along with the
date and time of the day.
C) The Sensor Calibration parameter (default is zero)
allows to vary the temperature shown on the display
from –5 to +5 degrees; this allows to calibrate the value
according to the room’s climatic conditions. Use the
[+%] and [-%] keys to change the value; each time a
key is pressed temperature is changed by +/- half a
degree. Press the [CASH ] key to confirm calibration.
The display returns to the main menu; to exit the menu press [Void].
2.7 NEGATIVE RECEIPT
TOUCH ME not fiscal version gives the possibility to issue negative receipts.
To enable this function, enter the
SRV
mode (5 + [KEY]), and scroll the menu with the
[%+] key until “
Negative Receipt
” is visualized.
A) Press [CASH] to start.
B) Press the [%-] key and then press [CASH]
(<YES>) to enable the possibility to issue negative
receipts, or else press [%+] and then press
[CASH] (<NO>) to have the possibility to issue
only positive receipts.
The display returns to the main menu; to exit the menu press [Void].
TEMP. ON DISPLAY ?
ON / <OFF>
- SERVICE -
Temp. sensor
SENSOR CALIBRAT.
+ 0.0 C
-- SERVICE --
Negative Receipt
NEGATIVE RECEIPT ?
YES / <NO>
