RCH
INSTALLATION AND MAINTENANCE MANUAL model TOUCH ME
- 40 -
6.3 TOTAL RESET
In order to reset the cash register, it’s
necessary to insert the Jumper J3
(indicated with “HWinit” in the picture)
with the device turned off. At start-up,
after detecting the closed contact, the
program asks to confirm with the
message “HW.INIT?” on the display.
At the end of the reset procedure, the
jumper must be removed and the
cash register must be reprogrammed.
1) Insert the jumper J3 – HW INIT
2) Turn on the cash register
3) When asked to confirm, select “SI” with the [%-] key and press [CASH]
4) Remove the jumper J3
5) Insert time and date by pressing [CASH] after each date insertion
6) The cash register prints a receipt indicating system reset.
After resetting:
−
The reset counter is incremented by one
−
The GT (Grand Total) is calculated on the basis of the daily registrations written in the fiscal
memory.
