RCH
INSTALLATION AND MAINTENANCE MANUAL model TOUCH ME
- 23 -
- Close
the
GRLOGO
application on the PC (clicking on the
X
in the upper right-hand
corner of the active window).
2.12.3 ENABLING LOGO PRINTING ON THE RECEIPT
To enable logo printing on the receipt, switch to Programming mode
PRG
(4 + [KEY]) and
press the
[+%]
key to visualize the
Header Msg
(Heading)
function
to enable the Store
Logo, and then the
Footer Logo
(Footer) function to enable the
Halo Logo.
Press [CASH] to enter function programming,
followed by the [+%] key to visualize “(-
SELECT LOGO-)
by user ”;
confirm using the [CASH] key. The TOUCH ME display
visualizes the request for inserting heading lines. If programming the header is not
necessary, exit programming by pressing the [Void Receipt/Void] key.
2.12.4 PRINTING LOGOS ON THE RECEIPT
After enabling Logo printing in the Programming mode, switch to Registration mode (1 +
[KEY]) and start emitting a receipt. The Halo logo will be printed at the end of the receipt,
and starting from the following receipt the Store logo will always be printed as well.
