The channel memory is the list of TV
channel numbers your TV will stop
on when you press the
CHANNEL
up
or down button. You can program
any list of channels into the channel
memory.
The quickest way to program your
channel memory is to use the
AUTOPROGRAM
function. If you
use the
function,
your TV will automatically cycle
through all channels and place active
channels into the channel memory.
First follow the instructions to
autoprogram channels, and then add
or erase individual channels as
desired.
Notes:
l
The
feature will place into
memory active TV channels that have a
valid signal at the time you autoprogram
your TV.
l
An active channel may be missed
occasionally if its signal is very weak or if
the channel happens to
“off the air”
when the TV is autoprogrammed.
l
An inactive channel may be included in the
channel memory if there happens to be
some sort of “noise” or “stray signal” on
the channel when the TV is
autoprogrammed.
l
Signals from other components connected
to the
INPUT
jacks can not be
autoprogrammed. Channel 91 (which
accesses
INPUT
I jacks) was added to the
channel memory at the factory and wjll
remain in the channel memory until you
erase it. Channel 92
(INPUT 2)
and
Channel
(S-VIDEO
connector) can be
added to channel memory if desired.
l
Only channels l-99 can be stored in
channel memory.
1.
Channels into Channel Memory
or without remote)
1. Connect home antenna(s) or
3.
Press or-to begin
TV to your set.
autoprogramming.
TV will first
2. After you have turned on the
TV
program all channels for
A
and adjusted the volume, repeatedly
input and
program all channels
press
MENU
to select
SETUP
for
ANT
input (even if you only
have one antenna
connected).
MENU,
and then press + or-to
display the setup functions.
Repeatedly press
MENU
to select
the
AUTOPROGRAM
function.
4.
When the TV is finished cycling,
you can cheek to see which
channels are in memory by pressing
the CHANNEL
up or down button.
2. Erasing/Adding Channels in Channel Memory
(with or without remote)
1. To erase or add a channel,
2. Then select
desired channel
repeatedly press
MENU
to select
number by pressing
CHANNEL
up
SETUP MENU,
and
press or
or down (or
two corresponding
-to display
the setup functions.
number buttons on
remote).
Repeatedly press
MENU
to select
3. Press + to add the channel to
CHAN MEM
function.
memory, or press -to erase the
channel from memory.
I
3. Adding Video Input Channels to Channel Memory
-(with remqte)
If you have a video device connected to
Adding channels
92 to
the
S-VIDEO
or
INPUT
jacks on the
channel memory allows access to the
back of the TV, you can view its signal
video
uts at
TV by pressing the
either by directly selecting channel 90
CHAN EL
up and down buttons as
(for
S-VIDEO
connector), channel 9 1
well
by using the remote control.
(for
INPUT
I jacks), or channel 92 (for
INPUT 2
jacks) with the number buttons
on the remote or by adding those
channels to the channel memory.
24
Summary of Contents for P52151WK
Page 1: ......
Page 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...