on
adjust the volume, and select a channel.
l
Press the TV button on the
remote to turn on the TV
When using the remote,
remember to point it at the
front of the TV.
l
Press the VOLUME
up or
down button to adjust the
volume to a desired level.
l
Press
the CHANNEL
up or
down button to select the next channel in memory. You can
also press two number buttons to select a channel. To select
a 3-digit cable channel (up to channel
press and hold
number button I until
appears on the screen. Then press
the other two numbers. Channels 13 were programmed
into the channel memory for you at the factory, so pressing
C H A N N E L
up or down stops at these channels only. When
you start the
feature (described in step
your set will automatically scan through all channels and
place only the active channels for your area into its channel
memory.
l
Details about using the remote are on page
1 3 .
Converge Colors if Necessary.
If you notice colored rings or halos around objects in the
picture, you may need to converge the colors. Over a period of
time, the picture tubes can drift out of alignment due to normal
bumps and vibrations or moving the TV. Details for
converging the colors are on page 15.
the TV’s channel memory.
To start the TV autoprogramming
itself, press
the MENU
button
repeatedly to select
SETUP MENU
and then press to display the
setup functions. Repeatedly press
MENU
again to select the
AUTOPROGRAM
function, and
then press +.
on page 24.
You can also add and erase
channels from memory as
desired. Press
MENU
repeatedly to select
the SETUP
MENU,
then press + to display
the setup functions. Press
MENU
repeatedly to select
(highlight)
the CHAN MEM
function. Select the desired
channel number by pressing the
C H A N N E L
up or down button or
by pressing the two
corresponding number buttons.
Then press + to add a channel, or
press -to erase a channel.
Details are on page 24.
Summary of Contents for P52151WK
Page 1: ......
Page 43: ..._ _ _ _ _l __ __ _ _ I _ _ ...
