RCA P52151WK, Owner'S Manual

Page: 24 / 56

The labeling feature lets you program
names (or labels) for the channel
numbers. The name you program
will then appear on the screen below
the channel number whenever the
channel number is displayed.
Each name can contain up to four
characters, and you’ll be able to
assign up to 64 names. After 64
names or labels have been entered,
the TV will display this message to
let you know no more channels can
be labeled:
CHAN LABEL: FULL.
Listed below are the letters and
characters from which you’ll be able
to choose when programming the
channel labels:
N O P Q R S T U V W X Y Z
(blank space) + .
0 1 2 3 4 5 6 7 8 9
. . ,
You must use your remote control to
create or erase labels.
22
Labeling Channels
(with remote only)
1 .
2 .
3 .
4 .
Repeatedly press
MENU
to select
SETUP MENU, and press or
to display setup functions. Repeatedly
press
MENU
to select
CHAN LABEL
function.
Press + to enter the
CHAN LABEL
function. Four blank letter frames
will appear under
channel number.
Select channel number you want
to label by pressing the
CHANNEL
up
or down button (or by pressing two
number buttons).
Press and hold the VOLUME up or
down button until the letter or
character you want appears on
screen. Pressing
VOLUME up
sequences through characters in
alphabetical order. Pressing
VOLUME down sequences the letters
in reverse order.
5 . Then press + to move to the next
letter frame. Pressing moves you
back to
previous letter frame.
6 . Repeat steps 4 and until the name
is complete. You can now label
another channel, if desired, by
selecting channel number and
repeating steps 4 and 5.
7 . When finished, the display will
automatically disappear from tbe
screen in a few seconds. Your
labels will remain in memory until
you erase are not
affected by power failures.
Erasing Labels
To erase a channel label, first follow
steps and 3 above, and then press
on the remote control.
Note: Autoprogramming new channels into
the channel memory does not effect the
channel labels that are already entered.